The HCD-S digital probe is characterized by its high performance. Very low current consumption, the highest accuracy, and measurement results within 50 ms (electronics) are its outstanding features. This is due to the new AirChip4000, which together with the new HYGROMER® HT-1 sensor forms a powerful combination.
Features
Accuracy w. adjustment profile "standard" | ±0.8 %RH / ±0.1 K, at 10...30 °C Adjustment at 23 °C and 10, 35, 80 %RH |
---|---|
Operating range | -40..85 °C / 0…100 %rF |
Probe type | Digital standard probe |
Power consumption | 2.5…5.5 VDC |
Long-term stability | <1 %rh / year |
Humidity sensor | Hygromer HT-1 |
Temperature sensor | Pt1000, Class B 1/3 |
Probe protection | Polycarbonate plastic cage, black |
Filter cartridge | Polyethylene |
Filter type | Polyethylene, 40 μm |
Response time t 63 | <15 sec. |
Allowed wind speed | 20 m/s, with filter |
Psychrometric calculations | Dew or frost point |
Current consumption | <0.5 mA @ 2.5…5.5 VDC |
Reproducibility Airchip | <0.02 %rh / 0.01 K |
Exploitation software | RMS-Config / RMS Server Software / RMS Cloud |
Probe adjustment by software | 1 Point & multipoint %rh & °C |
Firmware update | Via RMS-Config / RMS Server Software / RMS Cloud |
Digital output signal (standard) | UART |
Housing | Polycarbonate |
Max. cable length | Up to 5 m with passive cable. Up to 100 m with active cable. |
Reverse voltage protection | Mechanically in the connector |
FDA/GAMP compatibility | FDA 21 CFR Part 11 and GAMP compatible |
Dimensions | Ø15 x 108 mm |
Weight | 10 g |
Call us today on 01903772859 or email info@intechcalibration.co.uk